It features one driver with a diameter of 40 millimeters, enabling it to produce sound with a maximum rated power of 3 watts. Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.The JBL Go 2 is a mono portable speaker designed to deliver audio output through a single channel. Hopefully, this solution will help you fix the problem. Having the JBL Go 2 will not charge issue can be a frustrating experience. If this is what’s causing the problem then you will need to have this fixed at a service center. If water gets inside the speaker then it will damage its internal circuit. Some reasons as to why a battery will get damaged is repeated overcharging or constant exposure to heat such as when you leave the speaker under the sun. It’s recommended that you have this done at a service center. If this is the cause of the problem then replacing the battery will fix this. Method 4: Defective batteryĪ damaged battery can prevent the speaker from being charged. If you have an Android phone with a micro USB charging port then you can try using its charger to charge the speaker. Try using a different charging cord and wall charger to charge the speaker. Some of the reasons why a charger won’t work is if its cord is damaged or if the adapter itself has a faulty circuit. If the charger you are using is not working then it won’t be able to charge the speaker. Method 3: Replace the charger to fix will not charge issue Once done, check if you can charge the Bluetooth speaker. Try to inspect the charging port of the Bluetooth speaker and if you find any dirt or debris then you can clean this off using a toothpick or you can try blowing into it until it gets removed. If the port gets clogged with dirt then this will prevent the device from being charged. Using this speaker outdoors constantly especially if the rubber cover of its port is left open will expose it to dirt and debris. Method 2: Dirt present in the charging port of JBL Go 2 Try checking if you can charge the speaker. The device should now be in pairing mode. You can do this by pressing on the power button. Press and hold the Volume up button and Play button.This is usually done when you are experiencing problems with the device. This is a procedure that removes data stored on this Bluetooth speaker and brings it back to its default settings. The first troubleshooting step you have to do is a factory reset or hard reset. Method 1: Perform a factory reset on JBL Go 2 Here are the troubleshooting steps you need to do to fix the problem. This can be an annoying issue especially if the speaker is running low on power as you won’t be able to use it. One problem that you might encounter with your Go 2 Bluetooth speaker is when you can’t charge it. What to do when your JBL Go 2 won’t charge Bluetooth transmitter modulation: GFSK/DQPSK/8DPSK.Bluetooth transmitter frequency: 2.402–2.480GHz.Music playing time: up to 5 hours (varies by volume level and audio content).Battery type: Lithium-ion polymer (3.7V, 730mAh).Technical specifications of the JBL Go 2: Some of its features include an IPX7 waterproof design, 5 hours of playtime on a single full charge, and an audio cable input just to name a few. You can bring this speaker with you on your camping trip or on the pool as it has a rugged design that allows it to withstand the elements. The JBL Go 2 is a small Bluetooth speaker that fits perfectly in your pocket or bag. To fix this you will need to perform a series of troubleshooting steps on the device. It could be due to the speaker settings, a defective charging port, defective charging cable, or a defective charger. The “JBL Go 2 will not charge” issue can be caused by different factors.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |